Novitec Powerjet 3 for 1.4 TB

Novitec Powerjet 2 for Alfa Romeo MiTo with 1.4 TB engines.
Easy to install using plug&drive technology. Anybody can mount or dismount the Powerjet 3 within 10-30 minutes.
You have to disconnect 2 respectively 3 (depening on the engine type) senders and plug the Powerjet's "Y" wiring harness to those senders and to the engine's original wiring harness.

The Powerjet 3 reads the sensor data with multichannel-technology, modifies it and sends it to the original ECU without changing the original characteristic diagramme.
We recommend to use fuel with 98 or 100 octanes (Super Plus, high octane, Ultimate, VPower etc). This is basically not needed, only if you want to have the full power. We also recommend a sport airfilter and a Ragazzon sport exhaust system.

Performance:

• 1.4 TB with 135 bhp: 160 bhp
• 1.4 TB with 140 bhp: 165 bhp
• 1.4 TB with 155 bhp: 186 bhp
• 1.4 TB with 170 bhp: 195 bhp

Attention
Please note that every chip tuning will increase engine wear a little. Chip tuning uses the reserve capacity that Alfa has programmed into the for the original ECU of the 1.4 TB engine.

Money Back Warranty:
Order now, plug the Powerjet 3 into your car, have fun and if you don't like it, you can send it back within 3 weeks without any problems and with a full money refund.

ATTENTION! High addiction risk! You'll never want to send it back ;)

The bypass plug which is available as option can be connected to the Powerjet's cable harness instead of the black ECU box. It allows to drive the Alfa with the factory set-up without removing the Powerjet's cable harness from the engine.