Ferodo DS Uno Brake Pads - Rear

Print product data sheetFerodo DS Uno Brake Pads - Rear
Delivery Time: 1-4 W/days (stock item)
Product No.: 46328
269,00 EUR
incl. VAT excl. shipping
Ferodo DS Uno Brake Pads - Rear
Ferodo DS Uno Brake Pads - Rear


Ferodo DS Uno rear brake pads for Alfa 4C and 4C Spider

DS Uno is the latest heavy duty racing material from Ferodo Racing. It has replaced DS2.11 and is already race proven in GT, touring car, Formula & rally. The technical objective for the material was to provide a high friction output, whilst improving pad and disc life and to offer excellent modulability throughout the brake event. The latter means the risk of wheel lock is significantly reduced compared to other pads with the same high nominal friction coefficient, without any loss of output. This is the ultimate feel-good pad.

The main characteristics are:
  • heavy duty semi-endurance material
  • applications - touring car, GT, single seat, rally
  • average friction coefficient 0.48 over working temperature range of 200-700C
  • very controllable torque output
  • very kind to discs
  • long life
DS Uno pads are not recommended for street use and may only be ued in combination with high-carbon sports brake discs.
Without electric pad wear indicator.
No homologation, not street legal.

The price is for the complete axle (4 pads).

Important information: bedding of race pads
The aim is to bring the pads to full race temperatures, but slowly (too quick bedding results in glazing). This is done by a series of laps where full speeds may be attained but lighter braking pressures are used (i.e. the driver applies the brakes earlier). It is important that the pads are allowed to cool after the bedding process before racing. Ideally the pads will arrive at temperatures in excess of 500C during the bedding. Smoking pads during the cool-down are not a cause for concern.

Perform at least 15 trial brake applications, initially with reduced pressures (50% of the normal that might be used for that same brake application were it to occur under race conditions) building up to full decelerations after the 15 applications. To shorten the procedure applications can be made along the straights as well as at corners.

On completion of the trial applications, return to the pit lane. Inspect the surface of the brake pads from the two wheels that have been working the hardest. There should be evidence of contact over the full pad area, but without glazing. The pads are now ready to race. Whilst it is recommended that pads are inspected after bedding, if time does not allow this and paragraph 1 has been carried out appropriately, so long as a short period of time has elapsed to allow the brake system to cool (ideally to below 100C – this might take in excess of five minutes), the pads will be ready to race.


back


Customers who bought this product bought also the following products:
Alfa 4C Stainless Steel Brakeline Kit
Alfa 4C Stainless Steel Brakeline Kit
incl. homologation
MSRP 148,75 EUR
only   99,99 EUR
incl. VAT excl. shipping

1 x 'Alfa 4C Stainless Steel Brakeline Kit' order
Ferodo DS Uno Brake Pads - Front
Ferodo DS Uno Brake Pads - Front
225,00 EUR
incl. VAT excl. shipping

1 x 'Ferodo DS Uno Brake Pads - Front' order
Home / Startseite  Tuning & Styling   Fan Articles   Modelcars   Alfa Care 
Squadra Sportiva Logo | Company Website